- Railings & Balusters may be tapered & drilled for an additonal $2-$2.50 per end (tenon) &/or $1.50 per hole (drilled).
- Also, measured cuts = $1-$2 each on rails/balusters. Large posts, etc. = ask for cut charges
- Ask for a quote for custom cuts - some sizes must be custom cut -- and some sizes shown above may not be available.
- (50% deposit required on special orders or custom cuts --- may not be returned or exchanged)
- Add 20% for Douglas-fir and select blue-stained beetle-kill pine. Special pricing also applies to character mantels, etc. (see below).
- Curved Bark Slabs: Edged and Un-edged* Use price of lumber, based on thickness and width at mid-length, divided by 2.*Special order slabs=standard lumber prices
- Custom and character mantels and other pieces = 3x nominal dimensional prices.
- See dimensional prices above for 1" to 3" thick waneboard (bark on both edges), measured at mid-length to the nearest 1".
- Special surfacing services available on dimensional lumber:
- Planing: $.50 per sq. ft. one side; ask for special planing costs.
- Knife or adz hand hewing: $1.00 per sq. ft. one side.
- Lumber Delivery = $65 plus $2.00 per loaded mile, min.$50/hr., plus $25/hr. per person for labor unloading as needed. Delivery available only in limited territory.
- Exact dimensions and end trim may vary.
- Product is sold as is, and customer assumes sole responsibility for its suitability for chosen uses.
- Species, sizes and volumes are subject to availability, and may not be in stock.
- Customer is solely responsible for how product is used.
- Customer is responsible for determining local building codes and regulations, including grading of lumber. We can arrange for structural lumber to be graded at additional cost.
- Prices are subject to change without notice, FOB our mill.
- No refunds - exchanges only. Exchange must be made within 10 days of purchase. NO EXCHANGES ON CUSTOM & SPECIALTY ORDERS.
Important Information
